Traeger Over-the-Air (OTA) firmware updates are on a staged rollout, meaning not all grills will get the update at the same time. Please be patient as it could take a few days after a new version's release for your grill to get notified of the latest update and download the latest version.
FIND FIRMWARE VERSION ON YOUR GRILL:
Turn on display > Menu > About Grill
CHECK YOUR APP VERSION:
SUPPORTED OPERATING SYSTEMS
Affected Grills: Timberline, Timberline XL
Affected Grills: Timberline, Timberline XL
Affected Grills: Timberline, Timberline XL
Affected Grills: Ironwood 650, 885
Affected Grills: Timberline, Timberline XL
Affected Grills: Timberline, Timberline XL
Affected Grills: Timberline, Timberline XL
Firmware releasing by model over a two month period.
1. Updates to cloud connectivity to improve response time between grill and app
Config Versions:
· EU Timberline 1300 – 01.014
· EU Timberline 850 – 02.015
· Pro 780 – 03.010
· Pro 575 – 04.016
· Ironwood 885 – 05.009
· Ironwood 650 – 06.009
· Timberline 1300 – 07.006
· Timberline 850 – 08.005
· Silverton 810 – 09.005
· Silverton 620 – 10.005
· Century 885 – 11.005
2. Improved ignition performance
1. Updates to cloud connectivity to improve response time between grill and app
Config Versions:
· EU Timberline 1300 – 01.013
· EU Timberline 850 – 02.014
· Pro 575 – 04.012
· Ironwood 885 – 05.008
· Ironwood 650 – 06.008
· Timberline 1300 – 07.005
· Timberline 850 – 08.004
1. Updates to cloud connectivity to improve response time between grill and app
1. Enhancements to improve app stability and grill performance reporting.
1. Improved smoke performance in warm weather.
1. Improved temperature recovery when setting grill from high temperatures to a lower temperature and then increasing temperature.
1. Grill rebound response after lid has been opened
2. Updated shutdown sequence to maximize grill cool down for high temperatures.
3. Traeger highly recommends the removal of the collar below the induction fan if you experience hopper smoke during shutdown. Please contact 1-800-TRAEGER (1-800-872-3437) for assistance in removing the collar.
1. Hot weather adjustment implemented to keep grill running at set temperature below 225F in high temp environment.
A. What can the customer expect?
a. This kicks into effect when ambient grill temperature is 90F or higher and the grill is set to 225F or below.
b. User will see bigger spikes, but average out to desired temperature over the cook. (Example: a customer in Phoenix used this in 115F weather. With grill set at 225F, his average temp for the 12 hour cook was 224F.)
c. PRO TIP: Run Super Smoke mode during use in hot outdoor temperatures.
2. Bug fix for "Downloading Software Update" and "Update Failed” errors.
A. This was affecting a small percentage of consumers with spotty Wi-Fi signals, commercial grade deep packet data inspection, or users that killed power to the grill when it stated not to turn off the grill.
1. In v01.01.01, we equaled the startup sequence on temps over 300F to load pellets to match #2 of 1. Ignition Sequence.
This update fixed the issue causing the "hockey puck" in the firepot, resulting in an issue with airflow, ash, and pellets burning in the auger tube and jamming up. (Smoke coming out of the hopper was not addressed as that is something different. To avoid smoking coming out of hopper on shutdown, simply open the lid allowing the smoke to escape there instead of back the auger tube).
1. Adjustments to start-up sequence, controller behavior at various temperatures, and fan behavior during preheat and temp settings.
1. Updates to cloud connectivity to improve response time between grill and app